Product ID:PISTON INSULATOR(5003968)
MSDS Date:01/01/1987
FSC:1630
NIIN:01-114-9530
MSDS Number: BGMKX

GOODYEAR AEROSPACE CORP.

Emergency Phone: 216-796-2121

Cage: EO533

LORAL CORP DEFENSE SYSTEMS DIV-AKRON

AKRON, OH 44315-0001 US

Telephone: 216-796-2800

Cage: 25500

50-80%.

RTECS: GC2625000

Fraction By Weight: 65%.

ACGIH TLV: 2.0 FB/CC

20-40%.

Fraction By Weight: 30%.

ZINC STEARATE

CAS: 557-05-1

RTECS: ZH5200000

Fraction By Weight: 17.5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Effects of Overexposure:INHAL: (DUST)- ACUTE:NO EFFECTS EXPECTED;
CHRONIC: MAY LEAD TO ASBESTOSIS & MESOTHELIOMA.

First Aid:INHAL: REMOVE TO FRESH AIR. OBTAIN MEDICAL ADVICE; EYES: FLOW
W/H*2O. IF IRRITATION OCCURS, GET MED. ATTN.; SKIN: WASH W/SOAP &
WATER; INGEST: GET MED. ATTN. OTHER: CHANGE CLOTHING,IF
NECESSARY,TO AVO ID CARRYING DUST PARTICLES TO OTHER ENVIRONS.

Flash Point:NONE
Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:COMBUSTION PRODUCTS MAY BE TOXIC. USE SCBA IN
FIRE FIGHTING
Unusual Fire/Explosion Hazard:MFR CITES NONE

Spill Release Procedures:VACUUM OR WET CLEAN IF DUST IS INVOLVED. ANY
VACUUM SYSTEM SHOULD BE EQUIPPED W/AN OUTLET "HEPA" FILTER TO
PREVENT REINTRODUCING ASBESTOS FIBERS TO THE ATMOSPHERE.

Handling and Storage Precautions:HANDLE TO MINIMIZE DUST FORMATION OR
RETENTION. AVOID INHALATION OF DUSTS & VAPORS.
Other Precautions:CHRYSOTILE ASBESTOS IS LOCKED-IN APHENOLIC RESIN. AS
MADE, THE LOCKED-IN ASBESTOS DOES NOT PRESENT A HAZARD. ONLY WHEN
RESIN SYSTEM IS ABRADED & DUST GENERATED, ASBESTOS FIBER MAYBE
RELEASED.

Respiratory Protection:NIOSH/MSHA APPRVD RESP. FOR ASBESTOS IF EXPOSURE
> ESTABLISHED LIMIT
Ventilation:LOCAL EXHAUST IF HI-CONC. OF DUST GENERATED BY
MECH.ABRASION
Protective Gloves:AS REQUIRED
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS DATE:1/87

HCC:T6
Appearance and Odor:REDDISH BROWN MATERIAL(BRAKE COMPONENT)
Percent Volatiles by Volume:0.0

Stability Indicator/Materials to Avoid:YES
NONE
Hazardous Decomposition Products:OXIDES OF CARBON, PHENOL, FORMALDEHYE
FUMES
Conditions to Avoid Polymerization:WILL NOT POLYMERIZE.

Waste Disposal Methods:DUST SHOULD BE HANDLED AS A HAZARDOUS AIR
POLLUTANT IAW 40 CFR 61 SUBPART M. USE LANDFILLS APPROVED FOR
ASBESTOS DISPOSAL. SCRAP PARTS ARE NOT FRIABLE & ARE NOT RESTRICTED
UNDER AIR POLLUTION REGULATI ONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.